Tạp chí
 
Năm 2024
 
Số 65, Kỳ 6, [12 - 2024] - Tiếng Anh

Solutions to improving the efficiency of production organization at semi-mechanized longwall face I-6-2, Bac Quang Loi coal mine

DOI:10.46326/JMES.2024.65(6).01

  • Cơ quan:

    1 Hanoi University of Mining and Geology, Hanoi, Vietnam
    2 Dong Bac Corporation, Quangninh, Vietnam

  • *Tác giả liên hệ:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Nhận bài: 30-05-2024
  • Sửa xong: 19-09-2024
  • Chấp nhận: 14-10-2024
  • Ngày đăng: 01-12-2024
Trang: 1 - 10
Lượt xem: 43
Xem onlineXem online
Lượt tải: 2
Tải về PDF
★★★★★Yêu thích: , Số lượt: 0
  • ★
  • ★
  • ★
  • ★
  • ★
Bạn yêu thích

Tóm tắt:

Dong Bac Corporation is the second largest coal producer in Vietnam with output accounting for more than 14% of the country's total production. According to the plan, coal production from underground mines is expected to increase to 60% of the total Corporation’s production by 2025. To increase coal production in longwall mining, Dong Bac Corporation applies advanced technological solutions to modernize production stages, with the notable implementation of the semi-mechanized longwall mining technology. This technology uses a single-drum shearer and mobile hydraulic supports. The use of the technology has encountered challenges and difficulties, resulting in low production efficiency. The highest output achieved in the longwall face only reached 70% of the initial design capacity. The article presents the current status of technological innovation in underground coal mining of Dong Bac Corporation. The primary research subject is the semi-mechanized longwall face I-6-2 at Bac Quang Loi coal mine of Company 790, Dong Bac Corporation. Based on analysing the causes of difficulties, the authors provide solutions to improving production efficiency, safety, and the environment. Some solutions have been used in practice and have achieved positive and promising effects. Adjustment of production cycle organization chart to align with mining conditions has resulted in an increase in effective working time and a 17% rise in coal output. Accordingly, the authors propose technological orientations for the development of underground coal mining at Dong Bac Corporation.

Trích dẫn
Dung Tien Thai Vu, Khai Cao Nguyen, Phuc Quang Le và Luong Xuan Nguyen, 2024. Solutions to improving the efficiency of production organization at semi-mechanized longwall face I-6-2, Bac Quang Loi coal mine, Tạp chí Khoa học kỹ thuật Mỏ - Địa chất, số 65, kỳ 6, tr. 1-10.
Tài liệu tham khảo

Duong, D. H., Dao, H. Q., Marian, T. and Aleksandra, K. (2019). The status and prospect of mining technology in Vietnam underground coal mines. Inżynieria Mineralna, 2(2), 146-154. https://doi.org/ 10.29227/IM-2019-02-68.

IMSAT (2021). Summary report on the topic: Research and experimental application of semi-mechanized longwall mining technology using a single-drum shearer machine, supported by a mobile hydraulic support at the Bac Quang Loi coal mine, Company 790 - Branch of the Dong Bac Corporation (in Vietnamese).

Le, T. D. and Mai, H. H. (2022). Longwall top coal fall index from an integrated numerical and statistical analysis. Journal of Mining and Earth Sciences, 63(6), 85-92. https://doi. org/10.46326/JMES.2022.63(6).09.

Le, T. D., Bui, M. T., H., P. D., Vu, T. T. and Dao, V. C. (2019). A modelling technique for top coal fall ahead of face support in mechanised longwall using the Discrete Element Method. Journal of Mining and Earth Sciences, 59(6), 56-65.

Le, T. D., Nguyen, C. T. and Dao, V. C. (2020). Estimation of coal and rock mechanical properties for numerical modelling of longwall extraction. Inżynieria Mineralna. Journal of the Polish Mineral Engineering Society (Inżynieria Mineralna), 46(2), 41-47.

Nguyen, P. H., Bui, M. T., Vu, T. T. D. and Nguyen, T. M. H. (2020). Assessment of the effective working time on the mining output of the mechanized longwall (coal seam 11) in Ha Lam coal mine (in Vietnamese). Journal of Mining and Earth Sciences, 61(4), 95-101. https://doi.org/10.46326/JMES.2020.61(4).10.

Nguyen, V. D., Vu, T. T. D., Dao, V. C., Bui, M. T., Nguyen, P. H., Vu, T. Q. and Dinh, T. T. N. (2019). Setup knotting model to determine influencing factors and effective working time in the organizational structure of mechanized longwall production (in Vietnamese). Journal of Mining and Earth Sciences, 60(5), 60-66.

Phuong, K. M. (2022). Dong Bac Corporation breaks through in innovating and applying technologies to production development (in Vietnamese) http://tapchiqptd.vn/en/ theory-and-practice/dong-bac-corporation-breaks-through-in-innovating-and-applying-technologies-to-production-/18997.html.

Snopkowski, R., Napieraj, A. and Sukiennik, M. (2017). Examples of Using The Intensity Indicator of Winning Stream for Various Longwall Shearer-Based Mining Technologies. Scientific Papers of Silesian University of Technology. Organization and Management Series, 2017, 39-53. https://doi.org/10.29119/1641-3466. 2017.111.3.

Snopkowski, R., Sukiennik, M. and Napieraj, A. (2021). Stochastic Simulation of Production Processes - Selected Issues. Inżynieria Mineralna, 1(1), 137-146. https://doi.org/10.29227/IM-2021-01-18.

Vu, T. T. and Do, V. V. (2019). Research on reasonable initial roof caving control solution for the longwall at Company 86, Dong Bac Corporation (in Vietnamese). Journal of Mining Industry, 1, 14-20.

Vu, T. T., Le, T. D. and Vu, T. T. D. (2021). Development of Support Plan and Operation Scheme for Semimechanized Longwall Face of Coal Seam 10T, Nam Khe Tam Mine - 86 Company, Dong Bac Corporation. Inżynieria Mineralna, 1, 321-330. https://doi.org/10.29227/IM-2021-02-29.

Các bài báo khác