Tạp chí
 
Các số tiếng Anh
 
Số 63, Kỳ 3, [06 - 2022] - Tiếng Anh

Resection method for direct georeferencing in Terrestrial Laser Scanner

DOI:10.46326/JMES.2022.63(3).07

  • Cơ quan:

    1 Hanoi University of Mining and Geology, Hanoi, Vietnam
    2 Topcon Singapore Positioning Pte. Ltd Singapore, Ho Chi Minh City, Vietnam
    3 Vietnam Natural Resources and Environment Company, Hanoi, Vietnam

  • *Tác giả liên hệ:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Nhận bài: 05-01-2022
  • Sửa xong: 16-04-2022
  • Chấp nhận: 30-05-2022
  • Ngày đăng: 30-06-2022
Trang: 53 - 64
Lượt xem: 3453
Xem onlineXem online
Lượt tải: 2363
Tải về PDF
★★★★★Yêu thích: 5.0, Số lượt: 235
  • ★
  • ★
  • ★
  • ★
  • ★
Bạn yêu thích

Tóm tắt:

Recently, the direct georeferencing method has been increasingly used in Terrestrial Laser Scanner (TLS). This method has the benefit of saving time, but the low accuracy is a great difficulty to use. This paper proposed a possible approach for direct georeferencing with high accuracy using the resection method. Thanks to new series of TLS combined with a total station called the total station scanner, the resection method can be applied to overcome the problem. However, the assessment of the resection method on the quality of the point cloud is lacking up to now. In this paper, the influence of components of error sources in the resection method on the total error of the point cloud is analyzed. In the experiment, a Topcon GTL-1000 total station scanner was employed. A ground control network and checkered targets were established by a Leica TS06 plus total station. The experimental results verify that the total error of point cloud entirely agrees with the theory about georeferencing using the resection method. In addition, the distance and incidence angle from the scanner to the measured object are the main factors that considerably influence the accuracy of the point cloud. The relationship between these factors and the accuracy of the point cloud is non-linear measured by a coefficient of determination (R2>0.7). Using the resection method, the coordinates of the scan station can obtain at a millimeter level in accuracy. As a result, the resection method is one of the most suitable methods that can be applied for georeferencing in TLS. The high accuracy and saving time for TLS data post-processing in the office are enormous benefits of this method.

Trích dẫn
Dung Trung Pham, Anh Tuan Nhu Nguyen, Cuong Xuan Cao, Tinh Duc Le, Canh Van Le và Cuong Sy Ngo, 2022. Resection method for direct georeferencing in Terrestrial Laser Scanner, Tạp chí Khoa học kỹ thuật Mỏ - Địa chất, số 63, kỳ 3, tr. 53-64.
Tài liệu tham khảo

Altuntas, C.; Karabork, H. and Tusat, E. (2014). Georeferencing of ground-based LIDAR data using continuously operating reference stations. Optical Engineering 53(11): 114110.

Breach, M. C. ( 1994). Three-Dimensional Resection. Surveying and Land. Information Systems,.

Hofmann-Wellenhof, B.; Lichtenegger, H. and Wasle, E. (2007). GNSS–global navigation satellite systems: GPS, GLONASS, Galileo, and more. Springer Science and Business Media.

Jaud, M.; Letortu, P.; Augereau, E.; Le Dantec, N.; Beauverger, M.; Cuq, V.; Prunier, C.; Le Bivic, R. and Delacourt, C. (2017). Adequacy of pseudo-direct georeferencing of terrestrial laser scanning data for coastal landscape surveying against indirect georeferencing. European Journal of Remote Sensing 50(1): 155-165.

Lague, D.; Brodu, N. and Leroux, J. (2013). Accurate 3D comparison of complex topography with terrestrial laser scanner: Application to the Rangitikei canyon (NZ). ISPRS journal of photogrammetry and remote sensing 82: 10-26.

Lichti, D. and Gordon, S. (2004). Error Propagation in Directly Georeferenced Terrestrial Laser Scanner Point Clouds for Cultural Heritage Recording.

Reshetyuk, Y. (2009). Self-calibration and direct georeferencing in terrestrial laser scanning, KTH.

Scaioni, M. (2005). Direct georeferencing of TLS in surveying of complex sites. Proceedings of the ISPRS Working Group 4: 22-24.

Schuhmacher, S. and Böhm, J. (2005). Georeferencing of terrestrial laserscanner data for applications in architectural modeling 3D-ARCH 2005: Virtual Reconstruction and Visualization of Complex Architectures. XXXVI, PART 5: W17.

Soudarissanane, S.; Lindenbergh, R.; Menenti, M. and Teunissen, P. (2009). Incidence angle influence on the quality of terrestrial laser scanning points. Proceedings ISPRS Workshop Laserscanning 2009, 1-2 Sept 2009, Paris, France, ISPRS.

Zimmermann, F.; Holst, C.; Klingbeil, L. and Kuhlmann, H. (2018). Accurate georeferencing of TLS point clouds with short GNSS observation durations even under challenging measurement conditions. Journal of Applied Geodesy 12(4): 289-301