Determination of some characteristic fracture of concrete of notched beam in bending test

  • Affiliations:

    1 Faculty of Geoscience and Geoengineering, Hanoi University of Mining and Geology, Vietnam
    2 Faculty of Civil Engineering, Hanoi University of Mining and Geology, Vietnam
    3 Faculty of Civil Engineering, University of Transport and Communications, Vietnam
    4 Le Quy Don Technical University, Vietnam

  • *Corresponding:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Received: 17th-Oct-2020
  • Revised: 19th-Nov-2020
  • Accepted: 31st-Dec-2020
  • Online: 31st-Dec-2020
Pages: 96 - 101
Views: 2440
Downloads: 626
Rating: 1.0, Total rating: 62
Yours rating

Abstract:

This paper presents the identification some principal fracture parameters of concretes by experiment and simulation on notched beam in bending. The comparison between experimental and simulation results allows to determinate the Critical stress intensity factors KIC, fracture energy Gf and characteristic lengths of fracture process zone (FPZ) lch of 6 class of concrete with the compression resistance varying from 20 MPa to 50 MPa. These are important parameter in the model for predicting the timelife of concrete structure exposed in coastal area.

How to Cite
Son, B.Truong, Tho, P.Duc, Nu, N.Thi, Truyen, T.The and Hung, T.Nam 2020. Determination of some characteristic fracture of concrete of notched beam in bending test (in Vietnamese). Journal of Mining and Earth Sciences. 61, 6 (Dec, 2020), 96-101. DOI:https://doi.org/10.46326/JMES.HTCS2020.13.
References

Bažant, Z.P., Xiang, Y., (1997). Crack Growth and Lifetime of Concrete under Long Time Loading. J. Eng. Mech. 123, 350-358. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:4(350).

Chaboche, J.L, (1993). Development of continuum damage mechanics for elastic solids sustaining anisotropic and unilateral damage 311-329.

Desmettre, C., Charron, J.-P., (2011). Novel water permeability device for reinforced concrete under load. Mater. Struct. 44, 1713-1723. https://doi.org/10.1617/s11527-011-9729-6

Gilles Pijaudier-Cabot, Frédéric Dufour, Marta Choinska, (2009). Permeability due to the Increase of Damage in Concrete: From Diffuse to Localized Damage Distributions. J. Eng. Mech. 135, 1022-1028. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000016

Grassl, P., Jirásek, M., (2010). Meso-scale approach to modelling the fracture process zone of concrete subjected to uniaxial tension. Int. J. Solids Struct. 47, 957-968. https://doi.org/10.1016/j.ijsolstr.2009.12.010

Jan G.M. van Mier, (2013). Concrete Fracture: A Multiscale Approach.

Karihaloo, B.L., (1995). Fracture Mechanics and Structural Concrete. Longman Scientific and Technical.

Liu, H., Zhang, Q., Gu, C., Su, H., Li, V.C., (2016). Influence of micro-cracking on the permeability of engineered cementitious composites. Cem. Concr. Compos. 72, 104-113. https://doi.org/10.1016/j.cemconcomp.2016.05.016

Peter Grassl, (2009). A lattice approach to model flow in cracked concrete. Cem. Concr. Compos. 31, 454-460.

Other articles