Archives
 
Year 2025
 
Vol 66, Issue 4, [08 - 2025] - Full papers

Use two- and three-dimensional models to assess the stability of trench walls for underground construction in sand and sandy silty clay, supported by bentonite suspension

DOI:10.46326/JMES.2025.66(6).05

  • Affiliations:

    1 MienTrung University of Civil Engineering (MUCE), Phu Yen, Vietnam
    2 Faculty of Civil Engineering & Resource Management, AGH University of Krakow, Poland
    3 University of Sciences Hue, Hue University, Vietnam

  • *Corresponding:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Received: 19th-Feb-2025
  • Revised: 7th-June-2025
  • Accepted: 17th-June-2025
  • Online: 1st-Aug-2025
Pages: 70 - 77
Views: 21
View onlineView online
Downloads: 0
Downdload PDF
★★★★★Rating: , Total rating: 0
  • ★
  • ★
  • ★
  • ★
  • ★
Yours rating

Abstract:

A trench excavation is the first step in the underground wall construction process. Today, the technique of excavating trenches supported by bentonite suspension to prevent collapse and ensure trench stability has become common in many countries worldwide. Following this trend, this article applies the technique to a typical stratum in Hue City, Vietnam. Simultaneously, the study utilizes the Finite Element Method (FEM) with the RS software program and the Finite Difference Method (FDM) with the FLAC software program. Additionally, the Shear Strength Reduction (SSR) technique and the Mohr-Coulomb material model are employed to develop 2D and 3D models and analyze the stability of the bentonite suspension trench. The analysis is conducted under a scenario where no surcharge load is applied on the ground surface, and the surface is not reinforced with a concrete layer. The trench dimensions are 1 m in width, 6 m in length, and 10 m in depth, the densities of the bentonite suspensions are 10.5 kN/m³ and 12 kN/m³, with the level of bentonite suspension in the trench maintained equal to the ground surface level. The obtained results are as follows: (1) An evaluation of the safety factor of the bentonite suspension trench under the specified scenario; (2) A prediction of the influenced zone caused by the excavation of the bentonite suspension trench. Determining the influenced zone caused by trench excavation is closely related to the safety of neighboring structures near the excavation trench. Structures located outside the influenced zone are considered safe.

How to Cite
Le, T.Cat Thi, Cała, M., Stopkowicz, A. and Tran, A.Phuong Thi 2025. Use two- and three-dimensional models to assess the stability of trench walls for underground construction in sand and sandy silty clay, supported by bentonite suspension. Journal of Mining and Earth Sciences. 66, 4 (Aug, 2025), 70-77. DOI:https://doi.org/10.46326/JMES.2025.66(6).05.
References

Bamford, S., Titan, I., Barnes, A., Consulting, S., Beaumont, B., Design, S., Bell, B., Johnson, B., Godfrey, A., Consultant, B., Dulake, C., Tony, C., Parsons, H., Adrian, B., Kier, H., Ingham, B., Hire, M., Hash, S., Aecom, M., … Pallett, P. (2014). The use of European Standards for Temporary Works design. www.twforum.org.uk

Cala, M., and Flisiak, J. (2003). Complex geology slope stability analysis by shear strength reduction. In Brummer, An-Drieux, Detournay and Hart (Eds.) FLAC and Numerical Modeling in Geomechanics – 2003, Proceedings of the 3rd International Symposium, Sudbury, Ontario.

Cala, M., Flisiak, J., and Tajdus, A. (2006). Slope stability analysis with FLAC in 2D and 3D. 4th International FLAC Symposium on Numerical Methods in Geomechanics (Edited by Hart and Varona), 11–14.

Cała, M., Kowalski, M., and Stopkowicz, A. (2014). The three-dimensional (3D) numerical stability analysis of hyttemalmen open-pit. Archives of Mining Sciences, 59(3), 609–620. https://doi.org/10.2478/AMSC-2014-0043.

Cała, M., Le, T. C. T., and Stopkowicz, A. (2024). Three-Dimensional and Two-Dimensional Stability Analysis of Bentonite Slurry Trenches Using a Shear Strength Reduction Technique and Limit Equilibrium Methods. Applied Sciences (Switzerland), 14(12). https://doi.org/10.3390/app14125251.

Clough, G. W., ASCE, F., Thomas D. O’ Rourke, and ASCE, M. (1990). Construction Induced Movements of Insitu Walls. Specialty Conference on Design and Performance Earth Retaining Structures, 439–470.

Dawson, E. M., Roth, W. H., and Drescher, A. (1999). Slope stability analysis by strength reduction. Geotechnique , 49(6), 835–840. https://doi.org/10.1680/GEOT.1999.49.6.835.

Godlewski, T., Koda, E., Mitew-Czajewska, M., Łukasik, S., and Rabarijoely, S. (2023). Essential georisk factors in the assessment of the influence of underground structures on neighboring facilities. Archives of Civil Engineering, 69(3), 113–128. https://doi.org/10.24425/ace.2023.146070.

Instrukcja ITB 367/2002. (2020). Ochrona zabudowy w sąsiedztwie głębokich wykopów. Instytut Techniki Budowlanej.

Itasca Consulting Group, Inc. (2011). FLAC2D-Fast Lagrangian Analysis of Continua, Ver. 7.0 User’s Manual. Minneapolis. In Itasca Consulting Group.

Itasca Consulting Group, Inc. (2023). FLAC Theory and background — Itasca software documentation. https://docs.itascacg.com/itasca900/flac3d/docproject/source/theory/theory.html?node2317.

JasińSki, R., Skrzypczak, I., LeśNiak, A., and Natividade, E. (2024). Assessment of safety of masonry buildings near deep excavations: impact of excavations on structures. Bulletin of the Polish Academy of Sciences: Technical Sciences, 72(4). https://doi.org/10.24425/bpasts.2024.149817

Karolina Gorska. (2009). Stateczność pionowej szczeliny w gruncie.

Ke, N. B. (2010). Design and construction of deep foundation pits (in Vietnamese) (2rd ed., pp. 33–66). Hanoi Construction Publishing House.

Li, W., and Zhang, C. (2019). Stability analysis of a slurry trench in cohesive-frictional soils. Open Geosciences, 11(1), 888–900. https://doi.org/10.1515/geo-2019-0069.

Luo, H., Zeng, C., He, X., Li, W., and Li, Q. (2020). Analysis of the Finite Element Strength Reduction Method to Slope Stability with a thin weak layer. IOP Conference Series: Earth and Environmental Science, 570(6). https://doi.org/10.1088/1755-1315/570/6/062014.

Matsui, T., and San, K. C. (1992). Finite element slope stability analysis by shear strength reduction technique. Soils and Foundations, 32(1), 59–70. https://doi.org/10.3208/SANDF1972.32.59.

Oblozinsky, P., Ugai, K., Katagiri, M., Saitoh, K., Ishii, T., Masuda, T., and Kuwabara, K. (2001). A design method for slurry trench wall stability in sandy ground based on the elasto-plastic FEM. Computers and Geotechnics, 28(2), 145–159. https://doi.org/10.1016/S0266-352X(00)00028-8.

Piaskowski, A. (1965). Application of thixotrpic clay suspensions for stability of vertical sides of deep trenches without strutting. In Proc. of 6th ICSMFE (Vol. 2, pp. 526-529).

Rocscience. (2004). A New Era in Slope Stability Analysis: Shear Strength Reduction Finite Element Technique. https://static.rocscience.cloud/assets/verification-and-theory/RocNews-pdfs/StrengthReduction.pdf

Rocscience. (2012). RS2 version 11.012 | 2D Geotechnical finite element analysis | Rocscience, Tutorials.

Rocscience. (2023). RS3 Tutorials. https://www.rocscience.com/help/rs3/tutorials.

Rocscience Inc. (2001). Application of the finite element method to slope stability.

Tsai, J.-S., and Chang, J.-C. (1996). Three-dimensional stability analysis for slurry-filled trench wall in cohesionless soil. Canadian Geotechnical Journal, 33(5), 798–808. https://doi.org/10.1139/t96-105-325.

Washbourne, J. (1984). The three-dil tensional stability analysis of diaphragm wall excavations. Ground Engineering, 1, 24–29.

Zienkiewicz, C., Humpheson, C., and Lewis, R. W. (1975). Associated and non-associated visco-plasticity and plasticity in soil mechanics. Géotechnique, 25(4), 671–689.

Other articles