Archives
 
Year 2022
 
Vol 63, Issue 6, [12 - 2022] - Full papers

Enhancing the performance of boundary footing of a renovated building using micropiles: Numerical and Site Visual Assessment

DOI:10.46326/JMES.2022.63(6).07

  • Affiliations:

    1 Hanoi University of Mining and Geology, Hanoi, Vietnam
    2 Warsaw University of Life Sciences, Warszawa, Poland
    3 Polytech Grenoble, Grenoble, France

  • *Corresponding:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Received: 5th-May-2022
  • Revised: 21st-Aug-2022
  • Accepted: 11st-Sept-2022
  • Online: 31st-Dec-2022
Pages: 61 - 70
Views: 2045
View onlineView online
Downloads: 13
Downdload PDF
★★★★★Rating: , Total rating: 0
  • ★
  • ★
  • ★
  • ★
  • ★
Yours rating

Abstract:

Reconstruction and building extensions have become popular trends, even being recognized as one of the most appropriate options for homes, especially in high population density areas or crowded cities. Due to the changes in the size of buildings (by applying additional loads), the existing foundations themselves are incapable of resisting extra stresses. Therefore, it is imperative to increase the bearing capacity as well as the overall stability of existing foundations. The paper aims to present a numerical case study on the use of micropile elements for enhancing the performance of the boundary footing of a renovated building in terms of bearing capacity and stability. Moreover, the effect of cohesionless soil types on the bearing capacity of boundary foundations was presented. Numerically calculated results show that the stability of the boundary footing, presented in terms of the safety factor, was increased as strengthened by micropiles. The bearing capacity ratio (BCR) of the boundary footing was significantly improved when the relative distance (S) between the micropile and the boundary footing decreased, and the length of micropiles (L) increased; however, the BCR rose as the micropile’s angle (() with respect to the vertical increase. In other words, the performance of the foundation underneath the boundary footing was significantly affected by some micropile parameters, including length, inclination, and the distance between the micropile and the boundary footing. These crucial factors must be carefully examined during the design of the micropiles’ configuration for strengthening the boundary footing. Lastly, the load-carrying capacity improvement of the loose sand using micropiles was found to be more significant than that of denser ones.

How to Cite
Bui, D.Van, Nguyen, M.Van, Pham, N.Thi, Bui, T.Anh, Nguyen, T.Dang, Osinski, P. and Tatiana, B. 2022. Enhancing the performance of boundary footing of a renovated building using micropiles: Numerical and Site Visual Assessment. Journal of Mining and Earth Sciences. 63, 6 (Dec, 2022), 61-70. DOI:https://doi.org/10.46326/JMES.2022.63(6).07.
References

Acharyya, R., and Dey, A. (2017). Finite element investigation of the bearing capacity of square footings resting on sloping ground. INAE Lett., 2, 97-105.

Al-Aghbari, M.Y., and Dutta, R.K. (2008). Performance of square footing with structural skirt resting on sand. Geomech. Geoengin. Int. J., 3, 271-277.

Al-Aghbari, M.Y., and Mohamedzein, Y. A. (2004). Model testing of strip footings with structural skirts. Proc. Inst. Civ. Eng.-Ground Improv., 8, 171-177.

Bhattacharjee, A., Mittal, S., Krishna, A. (2011). Bearing capacity improvement of square footing by micropiles. Int. J. Geotech. Eng., 5, 113-118.

Bruce, D.A., Dimillio, A.F., and Juran, I. (1997). Micropiles: the state of practice part 1: characteristics, definitions and classifications. Proc. Inst. Civ. Eng.-Ground Improv.,1, 25–35.

Esmaeili, M., Nik, M.G., Khayyer, F. (2013). Experimental and numerical study of micropiles to reinforce high railway embankments. Int. J. Geomech., 13, 729–744.

Hwang, T.H., Kim, K.H., and Shin, J.H. (2017). Effective installation of micropiles to enhance bearing capacity of micropiled raft. Soils Found., 57, 36-49.

Juran, I., Bruce, D.A., Dimillio, A., and Benslimane, A. (1999). Micropiles: the state of practice. Part II: design of single micropiles and groups and networks of micropiles. Proc. Inst. Civ. Eng.-Ground Improv., 3, 89-110.

Lee, T.-H., Chul, I.J., Kim, C. (2016). A Method for reinforcing the ground adjacent to the footing using micropiles. Mar. Georesources Geotechnol., 34, 341-355.

Liu, J., Xu, T., Wang, X. (2021). Seismic Behavior and Design of Concrete-Filled Thin-Walled Steel Tube Column-to-Foundation Connections. J. Struct. Eng., 147, 04021072.

Momeni, E., Nazir, R., Armaghani, D.J., and Sohaie, H. (2015). Bearing capacity of precast thin-walled foundation in sand. Proc. Inst. Civ. Eng.-Geotech. Eng., 168, 539-550.

Raj, D., Bharathi, M. (2013). Bearing capacity of shallow foundation on slope: a review, in: Proceedings of the 4th ICSMFE.

Report on soil investigation. (2019). No: 2019.ĐC.TKKT.10.Viet Delta Consultancy., JSC.

Shah, I.A., Zaid, M., Farooqi, M.A., and Ali, K. (2021). Numerical Study on Micropile Stabilized Foundation in Flyash. Indian Geotech. J., 51, 1099–1106.

Terzaghi, K., Peck, R.B., and Mesri, G. (1996). Soil mechanics in engineering practice. John Wiley and Sons.

Vietnam Ministry of Transport. (2016). Research on the application of micropiles for transportation structures in Vietnam. Institute of Transport Science and Technology.

Xiang, Y., Long, W., and Shi, H. (2015). Analysis on horizontal bearing capacity based on catastrophe theory of anti-slide micropiles, in: ISRM VietRock International Workshop. OnePetro.

Other articles