Archives
 
Year 2022
 
Vol 63, Issue 1, [02 - 2022]

Application of gyrotheodolites in the determination of bearings for the hozirontal control network of Nui Beo underground coal mine

DOI:10.46326/JMES.2022.63(1).07

  • Affiliations:

    1 Hanoi University of Mining and Geology, Hanoi, Vietnam
    2 Nuibeo Coal Joint Stock Company - Vinacomin, Quang Ninh, Vietnam
    3 Vietbac Mining Industry Holding - Vinacomin, Hanoi, Vietnam

  • *Corresponding:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Received: 25th-Sept-2021
  • Revised: 9th-Jan-2022
  • Accepted: 4th-Feb-2022
  • Online: 28th-Feb-2022
Pages: 73 - 80
Views: 3971
View onlineView online
Downloads: 2631
Downdload PDF
★★★★★Rating: 1.0, Total rating: 262
  • ★
  • ★
  • ★
  • ★
  • ★
Yours rating

Abstract:

In Vietnam, coal mines are exploited deeper and deeper, and the method of seams opening using with mine shafts has been increasingly popular. For mine surveying, there are several methods of conveying the bearing to the tunnels, depending on the number of mine shafts, the depth and the cross-section of the shaft, and the available surveyring equipment of the mine. Each method has its advantages and disadvantages, and different application conditions. It has been proved that the method of conveying the bearing to the tunnels or underground orientation by traditional methods gives low accuracy, requires a lot of time and effort, and no assurance of accuracy. The method using a gyrotheodolite has the advantages of reducing time and effort and improving the level of safety. Therefore, the application of surveying gyro is considered as an effective alternative in this work. The paper presents the results of the application of a GYRO X II gyrotheodolite in determining bearings at -140 m and -350 m of the Nui Beo coal mine in order to improve orientation accuracy. The resulting bearings of the first lines of the 2-level underground traversing control networks were used to determine control points at the -140 m level and the -350 m level. The results proved the accuracy of the method with the biggest azimuth error of 9.23”, meeting the accuracy requirement of the Vietnamese standard for mine surveying.

How to Cite
Vo, D.Ngoc, Le, C.Van, Nguyen, D.Tien and Nguyen, T.Anh 2022. Application of gyrotheodolites in the determination of bearings for the hozirontal control network of Nui Beo underground coal mine (in Vietnamese). Journal of Mining and Earth Sciences. 63, 1 (Feb, 2022), 73-80. DOI:https://doi.org/10.46326/JMES.2022.63(1).07.
References

Mining Geology joint stock company-TKV (2020). Technical report on the establishment of a control network for the Nui Beo coal mine. Vietnam national Coal-Mineral industries holding corporation limited (Vinacomin), Hanoi. (in Vietnamese) 

Černota, P., Staňková, H., Brejcha, M., and Bouček, L. (2013). Application of the New Mine Surveying Methods for Purposes of the Longest Crosscutting in the Czech Republic. Recent advances in energy, environment and geology, 8-10.

Le, V. C., and Nguyen, V. N. (2014). Improve the efficiency of navigation through the vertical shaft of great depth at the Ha Lam coal mine. Mining industry journal, 3, 66-69. (in Vietnamese)

Le, V. C., and Nguyen, V. N. (2016). A solution to improve navigation accuracy between two vertical shafts with great depth at the Ha Lam coal mine. Mining industry journal, 3, 66-69. (in Vietnamese)

Jabłoński, M. (2019). The use of telemetric measuring methods to determine deformation of the shaft pipe and shaft towers. Przegad Gorniczy.

Nguyen, D. B., Vo, C. M., and Nguyen, X. T. (1998). Mine Surveying. Transport Publishing House, Hanoi. (in Vietnamese)

Nguyen, V. N., and Vo, N. D. (2016). Estimation of horizontal position accuracy of the Ha Lam underground control network using gyro-theodolite. Journal of Mining and Earth Sciences,55, 55-59. (in Vietnamese)

Pham, C. K. (2013). Research solutions to improve orientation accuracy through a vertical shaft. Mining industry journal, 2, 11-14. (in Vietnamese)

Vietnam National Coal-Mineral Industries holding corporation limited (2015). The TCVN 10673:2015 Standart on Mining Geodesy (Volume 1). Vietnam Ministry of Science and Technology. (in Vietnamese)

Topcon, (2021). Sokkia Automated Gyro Station GYRO X determines azimuth quickly, with precision - Technology ideal for tunneling, pipelines, and shipbuilding.

Vo, C. M. (2016). Mine Surveying. Science and Technology Publishing House. (in Vietnamese)

Vo, C. M., and Le, V. C. (2013). The sources of error affect the accuracy of coordinates and azimuth when orienting through two vertical shafts. Mining industry journal, 2B, 4-6. (in Vietnamese) 

Vo, N. D., and Nguyen, T. D. (2020). Effective application of the gyroscope to determine the azimuth and measure the orientation of the ground control grid for the Nui Beo underground mine. National Mining Science and Technical Conference. (in Vietnamese) 

Other articles