Archives
 
Year 2020
 
Vol 61, Issue 1, [02 - 2020]

Complete methodology to resist in mechanism longwall mine 6# at Nam Mau Coal Company

DOI:10.46326/JMES.2020.61(1).13

  • Affiliations:

    1 Faculty of Mining, Hanoi University of Mining and Geology, Vietnam;
    2 Vinacomin - Mong Duong Coal Joint Stock Company, Vietnam

  • *Corresponding:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Received: 15th-Oct-2019
  • Revised: 26th-Jan-2020
  • Accepted: 28th-Feb-2020
  • Online: 28th-Feb-2020
Pages: 116 - 123
Views: 2359
View onlineView online
Downloads: 1137
Downdload PDF
★★★★★Rating: 1.0, Total rating: 113
  • ★
  • ★
  • ★
  • ★
  • ★
Yours rating

Cited by: 1

Abstract:

Geological condition of 6# at Nam Mau coal mines is very complicated for mechanism longwall method, specialy was cause of is the cause of difficulties in moving hydraulic support, so it is necessary to have appropriate reform solutions for the support equipment to operate effectively. The result of dynamic field measurements at the site shows that the maximum support pressure is from 5 to 10 m in front of the mechanism longwall. The coal seam area is located close to the working face due to the influence of the support pressure and beyond the durable limit which was in an unconsolidated state, so it is possible to cause the mirror landslide and topping out. Calculation results show that the distance of 15 m against advance reinforcement at the junction of the furnace head and foot furnace as designed. The results of the study of the distribution of surrounding longwall face pressure, length of longwall need longer 40 meters.

How to Cite
Nguyen, H.Phi, Nguyen, K.Cao, Bui, T.Manh, Lai, T.Quang and Tran, T.Van 2020. Complete methodology to resist in mechanism longwall mine 6# at Nam Mau Coal Company (in Vietnamese). Journal of Mining and Earth Sciences. 61, 1 (Feb, 2020), 116-123. DOI:https://doi.org/10.46326/JMES.2020.61(1).13.
References

Akande, J. M. and Saliu M. A., (2011). Design of a Powered Support System in Enugu Coal Mine. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS) 2 (6). 1083 - 1089.

Chandan Kumar, 2014. Behavior of Shield Support in Longwall Mining. Thesis Department of Mining Engineering National Institute of Technology Rourkela.

Đỗ Mạnh Phong, Vũ Đình Tiến, (2007). Áp lực mỏ hầm lò. Nhà xuất bản Giao thông Vận tải.

Hoàng Hùng Thắng, Bùi Đình Thanh, Vũ Trọng Hiệt, (2012). Vấn đề xác định áp lực trong lò chợ cơ giới hoá khi khai thác vỉa mỏng, dầy trung bình dốc đứng. Tạp chí Năng lượng Việt Nam.

Hongpu Kang, (2014). Support technologies for deep and complex roadways in underground coal mines: a review. International Journal of Coal Science and Technology 1(3). 261 - 277.

Nông Việt Hùng, (2018). Nghiên cứu hoàn thiện một số thông số công nghệ khai thác lò chợ cơ giới hóa đồng bộ hạ trần than ở vỉa dày, dốc thoải và nghiêng tại các mỏ hầm lò vùng quảng ninh. Luận án tiến sĩ kỹ thuật. Đại học Mỏ - Địa chất.

Electrohydraulic control systems for powered roof supports in hazardous conditions of mining tremors

Viện Khoa học Công nghệ mỏ, (2006÷2010). Nghiên cứu lựa chọn công nghệ cơ giới hóa khai thác và thiết kế, chế tạo loại giàn chống tự hành phù hợp áp dụng cho điều kiện địa chất các vỉa dày độ dốc đến 350 tại vùng Quảng Ninh. Chương trình trọng điểm cấp Nhà nước giai đoạn 2006÷2010.

Other articles