Tạp chí
 
Năm 2020
 
Số 61, Kỳ 6, [12 - 2020] - Tiếng Anh

Application of fuzzy-logic to design fuzzy compensation controller for speed control system to reduce vibration of CBШ-250T drilling machine in mining industry

DOI:10.46326/JMES.2020.61(6).10

  • Cơ quan:

    1 Dong Nai University of Technology ,Vietnam,
    2 Hanoi University of Mining and Geology, Hanoi, Vietnam

  • *Tác giả liên hệ:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Nhận bài: 25-08-2020
  • Sửa xong: 06-12-2020
  • Chấp nhận: 31-12-2020
  • Ngày đăng: 31-12-2020
Trang: 90 - 96
Lượt xem: 1718
Xem onlineXem online
Lượt tải: 702
Tải về PDF
★★★★★Yêu thích: 5.0, Số lượt: 69
  • ★
  • ★
  • ★
  • ★
  • ★
Bạn yêu thích

Trích dẫn: 5

Tóm tắt:

The paper introduces fuzzy compensation control algorithm based on fuzzy logic to control the rotation speed in CБШ-250T drilling machine. The proposed solution uses an artificial neural network instead of a vibration measuring sensor to identify the amplitude and vibration frequency on a rotary drill. The vibration amplitude, vibration frequency and setpoint of the drilling speed are the input variables for the fuzzy logic unit. The fuzzy tool will diagnose the compensatory parameter δα with the target to reduce the vibration of the drilling equipment. The results were tested through modeling using Simulink_matlab tool. It can be applied to control system to improve control quality, and reduce vibration for CБШ-250T drilling machine, which is being operated on mines in Quang Ninh area.

Trích dẫn
Dung Ngoc Le và Chi Van Dang, 2020. Application of fuzzy-logic to design fuzzy compensation controller for speed control system to reduce vibration of CBШ-250T drilling machine in mining industry, Tạp chí Khoa học kỹ thuật Mỏ - Địa chất, số 61, kỳ 6, tr. 90-96.
Tài liệu tham khảo

Nguyen Chi Tinh et al. 2013, "Modeling the automatic control system of the rotation speed of CБШ-250T rotary drilling rig". Summary report on basic research 2013, University of Mining and Geology, Hanoi

B.Y. Lee, H.S. Liu, Y.S. Tarng, 1998, “Modeling and optimization of drilling process”, Journal of Materials Processing Technology, 74 (1998) 149–157

Le Ngoc Dung, Dang Van Chi, 2018, "Application of Matlab to study and analyze vibration frequency spectrum for CБШ – 250T drilling machine in the mining industry", Proceedings of the National Conference of Science earth and resources with sustainable development, transportation publisher, Hanoi

Jerome Rajnauth, Tennyson Jagai, 2012, “Reduce Torsional Vibration and Improve Drilling Operations “, International Journal of Applied Science and Technology, Vol. 2 No. 7.     

Nguyen Thac Khanh, 2003, "Research and improve the diagram of control system of rotary drilling machine CБШ-250T in open mines in Vietnam". Master of Engineering thesis, Hanoi University of Mining and Geology, Hanoi

Ngo Duc Thao, 1971, "Researching and proposing the automation system of drilling boreholes for open pit mining", Doctoral Thesis of Engineering, Moscow Mining University.

Edward A. Branscombe, 2010, “Investigation of Vibration Related Signals for Monitoring of Large Open‐Pit Rotary Electric” Queen’s University Kingston, Ontario, Canada

Stuart Jardine, Dave Malone, Mike Sheppard; 1994. “Putting a Damper on Drilling’s Bad Vibrations”, Sugar Texas – USA, Oil field Review

Claude E. Aboujaoude, 1991, “Modeling, Simulation and Control of Rotary Blasthole Drills”, Masters of Engineering, Department of Electrical Engineering McGill University, Montreal.

Nguyen Phung Quang, 2004, “Matlab and Simulik for automatic control engineers”, Publisher of Science and Engineering, Hanoi.

Thai Duy Thuc, 2001, "Theoretical basis for automatic electric transmission". Publisher Transport - Hanoi.

Alexei A. Zhukovsky, 1982, “Rotary Drilling Automatic Control system”. United States Patent

Эkcплуатационная документация; 2003; ВБІПРЯМИТЕЛБ ТПЕ-200-460-Y2.1. (Technical document on a rotary drilling machine - provided by Cao Son Coal Joint Stock Company).