Archives
 
Year 2021
 
Vol 62, Issue 5a, [12 - 2021]

Building 3D model for the deep vertical shaft in Nui Beo coal mine using Terrestrial laser scanning technology

DOI:10.46326/JMES.2021.62(5a).16

  • Affiliations:

    Hanoi University of Mining and Geology, Hanoi, Vietnam

  • *Corresponding:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Received: 25th-July-2021
  • Revised: 25th-Oct-2021
  • Accepted: 22nd-Nov-2021
  • Online: 1st-Dec-2021
Pages: 128 - 134
Views: 2006
View onlineView online
Downloads: 897
Downdload PDF
★★★★★Rating: 5.0, Total rating: 87
  • ★
  • ★
  • ★
  • ★
  • ★
Yours rating

Abstract:

Nowadays, deep vertical shafts have been built normally in Vietnam’s underground coal mines. During the operation of the underground coal mines, the deep vertical shafts must check periodically. With the advantages of fast measurement, high accuracy, point cloud data, the ability to process data by other specialized software, etc. Terrestrial laser scanning technology has allowed building 3D models for deep vertical shafts and used for other different purposes. In this present, by using Topcon's equipment and software, the process of establishing a 3D model for the main vertical shaft of the Nui Beo coal mine at a depth of 400 m was indicated. The simulation results have the cumulative error of sampling interval of stations not more than 4 mm, and the average position deviation of the aim direction relative to the vertical is 8.3 mm.

How to Cite
Tran, H.Hong and Pham, N.Thi 2021. Building 3D model for the deep vertical shaft in Nui Beo coal mine using Terrestrial laser scanning technology (in Vietnamese). Journal of Mining and Earth Sciences. 62, 5a (Dec, 2021), 128-134. DOI:https://doi.org/10.46326/JMES.2021.62(5a).16.
References

Bock J., Uhl O., Benecke N., Kuchenbecker R., (2009). Support of High - Performance Operations in Coal Mining by Use of 3D Laser Scanning. International Society for Mine surveying, 29 - 30 July 2009. UK.

Pfeifer, N., and Briese, C. (2007). Laser scanning-principles and applications. In GeoSiberia 2007 - International Exhibition and Scientific Congress (pp. cp - 59). European Association of Geoscientists and Engineers.

Lipecki T., Huong K. T. T., (2020). The development of terrestrial laser scanning technology and its applications in vertical shaft in Poland, Inżynieria Mineralna - Journal of the Polish Mineral Engineering Society, No 2(46), part 1, p. 301-310.

Nguyen Quoc Long, Michał M. Buczek, La Phu Hien, Sylwia A. Szlapińska, Bui Xuan Nam, Nguyen Viet Nghia, Cao Xuan Cuong, (2018). Accuracy assessment of mine walls' surface models derived from terrestrial laser scanning. International Journal of Coal Science and Technology, 5, 3, 328 - 338.

Nguyễn Viết Nghĩa, Võ Ngọc Dũng, (2016). Nghiên cứu khả năng ứng dụng máy quét laser 3D mặt đất trong quản lý xây dựng - khai thác mỏ hầm lò, Khoa học kỹ thuật Mỏ - Địa chất, 57, 65 - 73.

Nguyen Viet Nghia, Nguyen Quoc Long, Nguyen Thi Cuc, Xuan - Nam Bui, (2019). Applied Terrestrial Laser Scanning for coal mine High definition Underground, 71, 4, 237 - 242.

Nguyễn Viết Nghĩa, (2020). Khả năng ứng dụng công nghệ quét laser mặt đất kiểm tra thanh dẫn giếng đứng tại mỏ than Núi Béo, Công nghiệp mỏ, 2, 75 - 78.

Thomas P. K., Klaus M., Maren L., Harald S., (2009). Methods for geometric accuracy investigations of Terrestrial Laser Scanning systems. PFG - Photogrammetrie Fernerkundung Geoinformation, 2009, Heft 4, 301 - 314.

Võ Chí Mỹ, (2016). Trắc địa mỏ. Hà Nội: Nhà xuất bản Khoa học Tự nhiên và Công nghệ.